The X10 descales with use and automatically requires descaling. The degree of scaling depends on the hardness of your water.
If you are using a CLARIS Pro Smart filter cartridge, no descaling prompt appears.
The descaling program takes about 45 minutes.
JURA descaling tablets are available from Cafés Van Hove.
Descaling the machine
Condition: the home screen is displayed. The display shows "Descale device".
-
Press "Descale". Click on "Descale".
-
Press "Descale".
-
Press "Start". "Empty drip tray".
-
Empty the drip tray and coffee grounds container, then replace them. "Descaling agent in water tank
-
Remove the water tank and empty it.
-
Dissolve 3 JURA descaling tablets in a container of 600 ml water. This may take a few minutes.
-
Fill the empty water tank with the solution and replace it.
-
Place one container under the combination drain and another under the hot water drain.
-
Press "Next". If you press "Descale machine", water flows several times, directly into the drip tray and from the hot water outlet and combination outlet. The operation stops, "Empty drip tray".
-
Empty the drip tray and coffee grounds container, then replace them. "Fill water tank" / "Rinse water tank".
-
Empty the containers and replace them under the combination drain and hot water drain.
-
Remove the water tank and rinse thoroughly.
-
Fill the water tank with fresh water and replace it.
- Press "Next". If you select "Descale machine", the descaling cycle continues. Water flows several times, directly into the drip tray and from the hot water outlet and combination outlet. "Empty drip tray".
- Empty the drip tray and coffee grounds container, then replace them.
Descaling is complete. The home screen appears.
Note: If the descaling program is interrupted unexpectedly, rinse the water tank thoroughly.
