The X6 will scale with use and will automatically need descaling. The degree of scaling depends on the hardness of your water.
If you are using a CLARIS Pro Smart filter cartridge,
no descaling prompt appears.
The descaling program takes about 40 minutes.
JURA descaling tablets are available from Cafés Van Hove.
Descaling the machine
Condition: "Descale device" is shown on the display.
- Press the "
". - Press the "Start" button.
- Press the "Next" button . "Empty drip tray" button.
- Empty the drip tray and coffee grounds container, then replace them. Click on "Add product".
- Remove the water tank and empty it.
- Dissolve 3 JURA descaling tablets in a container of 600 ml water. This may take a few minutes.
- Fill the empty water tank with the solution and replace it.
- Place a container under the hot water outlet.
- Press the "Next" button . In the "Descale machine" mode, water flows repeatedly from the hot water outlet and directly into the drip tray. The operation stops, "Empty drip tray".
- Empty the drip tray and coffee grounds container, then replace them. "Fill water tank
- Remove the water tank and rinse thoroughly.
- Fill the water tank with fresh water and replace it.
- Place one container under the coffee spout and another under the hot water spout.
- Press the "Next" button. "Thedescaling cycle continues. The operation stops, "Empty drip tray".
- Empty the drip tray and coffee grounds container, then replace them.
Descaling is now complete.
Note: If the descaling program is interrupted unexpectedly, rinse the water tank thoroughly.
